The Care.

Allow Proper Curing Time

After installation, let the film’s adhesive cure for about 7days before washing or exposing it to harsh conditions, ensuring Peak PPF bonds securely to the paint.

Keep Hands Off While Film Settles

Avoid touching or picking at the film edges and don’t push on any small bubbles, as these minor imperfections are normal right after installation and will disappear as Peak PPF fully settles.

Use Soft Mitts and Microfiber

Opt for soft wash mitts and microfiber towels to gently clean the film, and avoid coarse brushes or sponges that could mar the PPF’s surface.

Avoid Harsh Cleaners

Stick to mild, PPF-safe cleaning products and avoid strong solvents or petroleum-based chemicals that could undermine the film’s adhesive or cause discoloration.

Avoid High Pressure At Edges

If using a pressure washer, keep it at low pressure and away from the film’s edges, since high-pressure water can cause the film to lift or become damaged.

Remove Contaminants Immediately

Clean off bird droppings, bug splatter, or tree sap as soon as possible, because these can cause stains or degrade the film if left for too long.

Hand Wash Only

Wash the windshield by hand with a soft mitt and pH-neutral shampoo. Skip automatic car washes and keep pressure washers away from the film edges.

Keep Wiper Blades Fresh

Worn or gritty blades mark any windshield film. Replace blades at the first sign of streaking and rinse grit off the glass before running the wipers.

Standard Washer Fluid Only

Use regular washer fluid. Avoid solvent-heavy de-icers, bug removers, and glass cleaners with ammonia, which can haze the top coat.

Heal With Heat, Never Scrape

Light marks fade with heat from the sun or a heat gun on low. Never scrape ice or debris off the film with a blade or scraper; let it melt or soak first.